Monday 2 April 2012

Kyocera Command Center default admin password

Just a quick heads up for those who are struggling to find the default web admin password for Kyocera printers, try accessing the printers IP address and using the code admin00

This has been tested on a fair few Kyocera printers but it took a lot of digging to find the code.

[Edit 22-05-2013]

Here is the list of additional printers which this password works for, collected from the comments section below.


FS-C5400DN
FS-1370DN
FS-1035DN
FS-6025MFP
FS-5250DN
FS-3920DN
TASKalfa 300ci
TASKalfa 552ci
FS-C5300DN
FS-C5350DN
FS-1370DN


[EDIT 01-06-2013]

I have been looking for a solution to the question below about a changed password and found a list of default passwords, the page I found this information on can be found here.


Command Centre Username and Password




Monochrome


Model
Username
Password



FS-2100DN
Admin
Admin
FS-4100DN
Admin
Admin
FS-4200DN
Admin
Admin
FS-4300DN
Admin
Admin
FS-1028MFP
admin00
FS-1030MFP

admin00
FS-1035MFP

admin00
FS-1128MFP
admin00
FS-1130MFP

admin00
FS-1135MFP

admin00
FS-3040MFP
admin00
FS-3140MFP
admin00
FS-3140MFP+
admin00
FS-3540MFP
admin00
FS-3640MFP
admin00
FS-6525MFP
Admin
Admin
FS-6530MFP
Admin
Admin
KM-2560


KM-3060

620

820

181

221

255

admin00
305

admin00
300i

admin00
420i

admin00
520i
No Default
admin00
3500i
Admin
Admin
4500i
Admin
Admin
5500i
Admin
Admin
6500i
Admin
Admin
8000i
Admin
Admin


Colour

Model Username Password






FS-C2526MFP
admin00
FS-C2626MFP
admin00
205c
Nothing when default
admin00
255c
admin00
250ci
admin00
300ci
admin00
400ci
admin00
500ci
admin00
552ci
admin00
2550ci
Admin
Admin
3050ci
Admin
Admin
3550ci
Admin
Admin
4550ci
Admin
Admin
5550ci
Admin
Admin
6550ci
Admin
Admin
7550ci
Admin
Admin

Machine Username and Password

Monochrome

Model
Username
Password



FS-2100DN
Admin
Admin
FS-4100DN
Admin
Admin
FS-4200DN
Admin
Admin
FS-4300DN
Admin
Admin
FS-1028MFP
2800
2800
FS-1030MFP
3000
3000
FS-1035MFP
3500
3500
FS-1128MFP
2800
2800
FS-1130MFP
3000
3000
FS-1135MFP
3500
3500
FS-3040MFP
4000
4000
FS-3140MFP
4000
4000
FS-3140MFP+
4000
4000
FS-3540MFP
Admin
Admin
FS-3640MFP
Admin
Admin
FS-6525MFP
2500
2500
FS-6530MFP
3000
3000
KM-2560
2500
2500
KM-3060
3000
3000
620
6200
820
8200
181
1800
221
2200
255
Admin
Admin
305
Admin
Admin
300i
3000
3000
420i
4200
4200
520i
5200
5200
3500i
3500
3500
4500i
4500
4500
5500i
5500
5500
6500i
6500
6500
8000i
8000
8000

Colour

Model
Username
Password



FS-C2526MFP
Admin
Admin
FS-C2626MFP
Admin
Admin
205c
Admin
Admin
255c
Admin
Admin
250ci
2500
2500
300ci
3000
3000
400ci
4000
4000
500ci
5000
5000
552ci
5500
5500
2550ci
2500
2500
3050ci
3000
3000
3550ci
3500
3500
4550ci
4500
4500
5550ci
5500
5500
6550ci
6500
6500
7550ci
8000
8000

67 comments:

  1. works for FS-C5300DN.... Thanks!

    ReplyDelete
    Replies
    1. dears i have FS 6025 MFP

      i need to access the settings from Internet explorer

      i try 2500 , 6025 , admin admin

      pleasewhat is the password for ie. ?

      regards

      Delete
    2. The codes we are aware of are all listed above, these should work in any browser as far as I am aware.

      Delete
    3. taskalfa 2550 ci error f000

      Delete
  2. Thanks! Works for the TASKalfa 552ci.

    ReplyDelete
  3. Thank you! It worked like a charm for the TASKalfa 300ci.

    ReplyDelete
  4. Thanks, worked for Kyocera FS-3920DN

    ReplyDelete
  5. works with Kyocera FS-5250DN, too

    ReplyDelete
  6. thanks works for FS-6025MFP

    ReplyDelete
  7. works with Kyocera FS-1035DN, too

    ReplyDelete
  8. Thanks, Works with FS-1370DN, too

    ReplyDelete
  9. Thanks guys, much faster to find you than looking through endless Kyocera docs!

    ReplyDelete
  10. Thanks !!! Life Saver!!

    ReplyDelete
  11. Thanks for the tip !

    ReplyDelete
  12. Works for FS-C5400DN

    ReplyDelete
  13. What is the user name?

    ReplyDelete
    Replies
    1. From what I can remember it is either blank or admin, sadly I do not have one of these near me at the moment

      Delete
  14. Thanks from a US Tech.

    ReplyDelete
  15. Works also on FS-C5350DN, great job!

    ReplyDelete
  16. Thanks.
    Works for FS-3920DN

    ReplyDelete
  17. Hello, te customer change the password and do not remember it, is a fs1135, should work the admin00, or there is a way to reset it? thenks in advance

    ReplyDelete
    Replies
    1. You could try logging in from the control panel on the printer the username and password may both be '3500' this has worked on other units.

      Delete
  18. Hi any idea what the password for the FS-C1020 is?

    ReplyDelete
    Replies
    1. Sorry, the only codes we know of are those published above and in other comments, with a little luck someone else will respond with a code for you :-)

      Delete
  19. Works Fs-2100DN many thanks. Why on earth its not in the manual I will never know!

    ReplyDelete
  20. Many thanks!!! Works fine for the TASKalfa 3500i and FS-3640MFP

    :)

    ReplyDelete
  21. Thank you,
    Confirm it works on FS-1370DN
    Powerthink

    ReplyDelete
  22. It's normally not included in the manual, as most people leave the code as default, and anyone who picks the manual up could make changes to the machine, disable department codes, reset counters etc.

    ReplyDelete
  23. I confirm for FS-C5150DN.
    Thank you!

    ReplyDelete
  24. Well thank you very much from México! this helped me a lot! :D

    ReplyDelete
  25. My high school district in California has just switched to Kyocera prints, and I am have mixed emotions. I can install some of my legacy HP printers from the command line using HPs universal print driver, and its very easy. There is no need for printui.dll see example (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=503548&objectID=c01839749)

    Is there anything like that for the Kyocera universal installer that you know of? My google searches are coming up blank.

    ReplyDelete
  26. Cheers, helped me out of a tricky spot.
    FYI, the default for the TaskAlfa 820 is 8200 :)

    ReplyDelete
  27. Thanks for the post. The info worked for my FS-2020n. Kudos!

    ReplyDelete
  28. Thanks! Worked like a charm.

    ReplyDelete
  29. GREAT. It was very helpful.

    ReplyDelete
  30. Gracias.. me funciono para la Kyocera FS-1035MFP.

    ReplyDelete
  31. do anybody know how we can reset the pwd for a FS-1350DN and a FS-5350C? We have lost the passwords (changed for security reasons before ;-) ) and my collegeau lost it.

    Thank in advance, Peter

    ReplyDelete
  32. Thank U! u r help me

    ReplyDelete
  33. TASKalfa - 3051ci
    Admin Admin
    Case sensitive, like all the ones posted above.

    ReplyDelete
  34. Hi, is there a way to reset a FS-4100 to factory settings ?? I forgot password and i cannot access some config in the web page. thanks...

    ReplyDelete
  35. The 265ci default login for Command centre turns out to admin00.

    Ta very much

    ReplyDelete
  36. Thank You so much. You really saved my a#$ today. I want to specify a few things for kyocera mfp 6025. If the machine asks for password,just enter admin00 and if it asks for username and password, enter Admin Admin (case sensitive)

    ReplyDelete
  37. Hi! Thanks for your work with that. I have a P6026cdn and l/p is Admin / Admin. Just fyi...

    ReplyDelete
    Replies
    1. No works for Kyocera 5501i please helpme

      Delete
    2. username: Admin
      Passwoerd: Admin

      Delete
  38. Thank u ..... it worked for FS - 6525MFP

    ReplyDelete
  39. Have the TASKalfa 255 and admin00 worked. phew, was running out of ideas! THANKS!!

    ReplyDelete
  40. FS-C2126MFP+ - admin00
    Thanks from NZ

    ReplyDelete
  41. Many thanks: used for fs1370dn

    ReplyDelete
  42. The 6021cdn uses Admin / Admin

    ReplyDelete
  43. Good work dammit!

    Many thanks from a tiny home office in Perth OZ!

    ReplyDelete
  44. Great job! Just got me out of a pinch

    ReplyDelete
  45. Thanks, you can add the 400ci to the list of printers that have 'admin00' as their login password when accessing the IP address through a browser.

    ReplyDelete
  46. fs-1128 mfp web base login admin00 is not working machine login is ok, but i need to get into web application

    ReplyDelete
  47. Our old network Lanier printer suddenly was doing this. Unchecking the SNMP worked the magic. Much appreciate it!

    ReplyDelete
  48. please for kyocera m2535dn what the admin pasword for login

    ReplyDelete
  49. hello. triumph adler dc2060 admin??? ...need help. thank you!!

    ReplyDelete
  50. I have TASKalfa 300ci. I have tried to login this. It really worked.

    ReplyDelete
  51. Admin00 works fine on FS-C5350DN, we have two in our building. Tested on both and they logged straight in.

    Thanks!

    ReplyDelete
  52. I have a taskalfa 3050ci but Admin / Admin is not working. any ideeas?

    ReplyDelete
  53. Help me Admin and pasword for Kyocera ECOSYS M2535dn

    ReplyDelete

Please enter your comment here, all comments are subject to moderation